Installing 123Stat on your site

step-by-step instructions		 [ Quick link to the 123Stat code ]

What do I need to do ?

For traffic analysis to start you need to add a few lines of HTML (the 123Stat code) to all of your site's pages (at least to the main entrance page if you can not install on all pages)

How do I go about it ?

Ideally the code needs to be added directly inside the page's HTML. Depending on how you go about editing your web site, the exact way to do this will vary. You will find below step-by-step instructions for a few well known editors, as well as more general instructions if your own editor is not in the list.

If you do not know how to make changes to your own site, you'll need to ask your webmaster to do the installation: simply tell him that he will find all necessary instructions at http://www.123stat.com/code.pl?user= and he should be able to do the installation for you in a few minutes.

Keep in mind that in almost every case, as long as your site can be edited, 123Stat can be installed (even if you don't have direct access to your HTML). If you get stuck, contact us and we'll help you out.


Step-by-step instructions for a few popular editors:


Your editor is not in the list above ?


Problems ? difficulties ?
Done installing ? Test your account



Default install with FTP and text editor
  1. click here to open a new window containing the 123Stat code to be added to your site

  2. with your mouse, highlight the code

  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)

  4. using your FTP program (for instance you can download CuteFTP from www.cuteftp.com) connect to your server

  5. still in your FTP program, download from your server to your computer the HTML file for your site's main page (most likely this file is named index.html, index.htm, default.html or default.htm)

  6. using Windows Notepad, Macintosh SimpleText or any other simple text editor, open the file that you just downloaded. Note that the file must be opened in 'text mode'. In simple text editors that's the default, in others you need to specify it.

  7. put the cursor just above the </body> tag at the end of the file (for instance, or anywhere else between the <body> and </body> tags if you know what you are doing - see here for more info on positionning the counter)

  8. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)

  9. save the modified file

  10. using your FTP program, upload the modified file back to your server

  11. go to your site : if you have setup your counter to be visible you'll see it appear on your web page (if not you can make the counter visible just for testing purposes in the 123Stat Control Panel)

... That's it ! You can now test your installation


Step-by-step instructions for a few popular editors:

MySpace

123Stat is the only hit counter that can be installed on a MySpace web site. Here is how to go about it:

  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your MySpace web site
  5. click on 'Home'
  6. log in (using the login box on the top-right of the screen)
  7. click on 'Edit Profile'
  8. insert the cursor at the very end of the 'Headline' section
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. click on 'Save All Changes'

... That's it ! You can now test your installation


MySpace Blog

123Stat is the only hit counter that can be installed on a MySpace blog. Here is how to go about it:

  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your MySpace blog
  5. log in
  6. click on 'customize' in the left side bar
  7. select 'Your Own Header HTML'
  8. insert the cursor in the 'Your Own Header HTML' box
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. scroll down and click on the 'update' button

... That's it ! You can now test your installation


Xanga
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to www.xanga.com
  5. log into your Xanga account
  6. click on the 'Look and feel' link in the left-hand module
  7. scroll down to the 'Website Stats' area
  8. click anywhere in the 'Module' text box area
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. click the save changes button

... That's it ! You can now test your installation


Friendster
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to www.friendster.com
  5. sign in (top-right)
  6. click on 'settings' (top-right)
  7. select 'Safe mode' > 'no' (this will allow you to use HTML on your page)
  8. click on 'My Profile' > 'Edit Profile'
  9. go to the 'About Me' box
  10. click at the end of the text area
  11. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  12. click the 'Save' button

... That's it ! You can now test your installation


Blogger.com
  1. On Blogger.com you need to use the XHTML version of the 123Stat code : click here to open a new window containing this version of the code
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your blog
  5. sign in (top right of the screen)
  6. next to your blog name click on the 'layout' link
  7. click on 'Edit HTML'
  8. scroll down to the very bottom and find the line that says '</body>' (there is only one)
  9. insert the cursor just above that line
  10. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  11. click on 'Save Template Changes' at the bottom of the page
  12. on the next page click on 'Republish'

... That's it ! You can now test your installation


Blogster.com
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your blog
  5. sign in (top of the screen)
  6. click on 'My Settings' at the top
  7. go into the 'About Me' box
  8. insert the cursor at the end of the box
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. click the 'Save My Settings' button

... That's it ! You can now test your installation


LiveJournal
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your LiveJournal page
  5. sign in (top of the screen)
  6. click on 'Home' in the top menu bar
  7. click on 'Customize Journal' in the left menu bar
  8. click on the 'Custom Options' tab
  9. scroll down to the box that says 'If you have an external web counter, you can enter the HTML for it here'
  10. insert the cursor in the box
  11. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  12. click the 'Save Changes' button

... That's it ! You can now test your installation


Vox
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your Vox page
  5. click on 'sign in' (top of screen)
  6. sign in
  7. click on 'Embed a widget' in the right-side menu bar (or if a widget already exist, click on 'Edit'
  8. insert the cursor in the widget box
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. click the 'Save Changes' button

... That's it ! You can now test your installation


Front Page 2002
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. edit the page in the Normal pane
  5. insert the cursor where you want the counter to appear
  6. in the FrontPage menu bar do 'Insert > Web Component'
  7. in the left pane, click 'Advanced Controls'
  8. in the right pane, double-click 'HTML'
  9. click inside the 'HTML Markup' window
  10. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  11. click on OK, save your page and publish

... That's it ! You can now test your installation


Front Page 2000
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. view your page in 'Design View' (default view)
  5. insert the cursor where you want the counter to appear
  6. click 'insert -> Advanced' and select 'HTML'
  7. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  8. click 'OK'
  9. save and publish your page

... That's it ! You can now test your installation


Front Page 97 / Front Page Express
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your page in FrontPage Express
  5. place your cursor where you would like the code to be inserted, and choose Insert > HTML Markup from the top menu
  6. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  7. the code will appear as either a graphic or graphic icon
  8. save and publish your page

... That's it ! You can now test your installation


Microsoft Publisher
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your page in Microsoft Publisher
  5. click on bottom of page
  6. click Insert, Advanced and select 'HTML'
  7. place your cursor where you would like to insert the counter - anywhere between the <Body> and </Body> tags
  8. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  9. click OK
  10. save and publish your page

... That's it ! You can now test your installation


MSN Spaces
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to spaces.msn.com
  5. click on 'Go to your space'
  6. sign-in with your email address and password
  7. click on 'Web log' or 'Blog' in the menu bar
  8. click on 'add an entry'
  9. click on <HTML> in the editor's menu bar
  10. place your cursor between <DIV> and </DIV>
  11. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  12. click on 'publish'

... That's it ! You can now test your installation


MSN Groups
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. visit the page you want to install the counter on (for instance http://groups.msn.com/your_group/)
  5. make sure you are logged in with your .net account and click the 'Edit this Page' link in the left-side menu
  6. insert the cursor in the large 'Create your New Page' (it's probably best to insert it at the very start or the very end so as not to affect your website)
  7. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  8. click the save page button

... That's it ! You can now test your installation


Netscape Composer
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to your site using your Netscape browser
  5. in the browser's menu bar select 'File > Edit Page'
  6. this will open your web page in Composer
  7. at the bottom-left of the Composer window, select the '<HTML> Source' tab
  8. scroll down to the very end of the file until you see the </body> tag
  9. click just before that tag to insert the cursor
  10. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  11. in Composer's menu bar do 'File > Publish'

... That's it ! You can now test your installation


AOLHometown (with Easy Designer)
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. connect to your site
  5. click on 'Edit My Pages' on AOL's menu bar on top of your screen
  6. enter your screen name and password
  7. on the next screen, select the page on which you want to insert the counter
  8. click on 'Edit'
  9. wait for Easy Designer to load
  10. click on the blue 'click to get started' button
  11. once your page has finished loading in Easy Designer, go to the menu bar on top of the screen
  12. go to Insert > Advanced HTML
  13. click into the new window that opened on your screen (EasyDesigner Advanced HTML editor)
  14. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  15. make sure that the code in the Easy Designer window looks exactly like the code we issued
  16. click on 'OK'
  17. drag the newly created 'HTML object' box wherever you want the counter to appear on your page
  18. click on 'Preview' to check your work
  19. if you are happy with it click on the 'Save' button on the Easy Designer menu bar

... That's it ! You can now test your installation


Adobe PageMill 3.0
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your web page in Adobe PageMill
  5. place the cursor in the place where you want to put the counter code
  6. choose 'View / Source Mode' in the top menus
  7. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  8. choose 'View / Source Mode' in the top menus (this will uncheck 'View / Source Mode' in the menu)
  9. the counter code consists of the highlighted objects
  10. save your document and upload it

... That's it ! You can now test your installation


Dreamweaver 2
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your page in Dreamweaver and click on the HTML tab
  5. insert the cursor anywhere between the <Body> and </Body> tags
  6. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  7. ignore broken image tags
  8. close the window and save the changes to your page
  9. publish your page

... That's it ! You can now test your installation


Dreamweaver 3
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your web page in Dreamweaver 3.0
  5. select 'HTML source code' from the 'Window' pull-down menu
  6. insert the cursor anywhere between the <Body> and </Body> tags
  7. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  8. ignore broken image tags
  9. close the window and save the changes to your page
  10. publish your page

... That's it ! You can now test your installation


Dreamweaver 4
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your web page in Dreamweaver 4.0
  5. go to 'Edit > Preferences'
  6. click on 'Code Rewriting'
  7. un-check both 'fix invalidly nested and unclosed tags' and 'remove extra closing tags' (the 'warn when fixing or removing tags' box will automatically uncheck once the above two options are manually unchecked)
  8. click the '<>' button to go to code mode (or select View > Code)
  9. insert the cursor anywhere between the <Body> and </Body> tags
  10. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  11. preview in your browser to make sure that the code is inserted properly
  12. save file

... That's it ! You can now test your installation


HotDog Pro
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. insert the cursor anywhere between the <Body> and </Body> tags
  5. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  6. ignore red highlighted code errors

... That's it ! You can now test your installation


HotMetal Pro
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. insert the cursor anywhere between the <Body> and </Body> tags
  5. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  6. ignore any markup errors

... That's it ! You can now test your installation


Net Objects Fusion
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. open your page in Net Objects Fusion
  5. click on 'Layout Properties'
  6. click on the 'HTML' button
  7. click on 'Beginning of Body' tab
  8. insert the cursor into the text box
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. click 'OK'
  11. save and publish your page

... That's it ! You can now test your installation


Visual Page 2.0
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to view > source (in menu bar)
  5. insert the cursor anywhere between the <Body> and </Body> tags
  6. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  7. return to Page View (view > page)
  8. ignore all extraneous code on page. (It will not affect how the page displays in a browser)
  9. do not edit or delete any code !

... That's it ! You can now test your installation


FreeWebs
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. log onto http://www.freewebs.com/ and enter your user name and password
  5. click the 'Site Manager' link on the left side of the screen
  6. click the 'Edit' button beside the page on which you want to install 123Stat
  7. select 'Raw HTML Paragraph' from the 'Paragraph Type' drop down menu at the top of the page
  8. insert the cursor anywhere in the large text area
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. click the done button

... That's it ! You can now test your installation


TypePad
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. log into your account at Typepad.com
  5. go to 'Typelist Tab'
  6. create a New Typelist
  7. list type: Choose Links
  8. list Name: Choose a Name
  9. under the Manage Tab: Add a New Item
  10. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  11. save item
  12. go to Configuration and Make sure you have selected Text under Display Notes: as Text

... That's it ! You can now test your installation


Zoomshare
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. log into your account at Zoomshare
  5. click on 'Web Page Editor'
  6. wait for the editor to load with your page appearing in it
  7. click on the 'HTML' button in the editor's menu bar
  8. a popup window is opened containing the HTML code for your site
  9. scroll down to the bottom of this window
  10. insert the cursor anywhere in the window
  11. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  12. click on the 'save' button in the editor's menu bar

... That's it ! You can now test your installation


Godaddy
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to http://www.godaddy.com
  5. log in (top right)
  6. click on 'My account'
  7. click on 'Custon Web Site Design'
  8. next to your site name click on 'launch' in the 'edit site' column
  9. select the page on which you want to add 123Stat in the drop down menu
  10. click on 'Page Options' then on 'add a content block'
  11. click inside the new content block
  12. click on the 'HTML' icon at the bottom-left of the editor and insert the cursor in the box
  13. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  14. click on 'OK'
  15. publish your site

... That's it ! You can now test your installation


Tripod/Lycos
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. go to http://www.tripod.lycos.com/build/index.html
  5. log in on the left side of the screen
  6. in the left menu bar, click on 'Site Builder' in the 'Build and Edit' section
  7. click on the site name for the site on which you want to add 123Stat
  8. at the bottom of the page click on 'Site Add-ons'
  9. scroll down your page and click on 'Add to site footer'
  10. click on 'Interactive Features'
  11. click on 'Add' in the 'Add your own HTML' section
  12. insert the cursor
  13. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  14. click on 'done'
  15. click on 'preview changes' to check your work
  16. if all is well, click on 'publish'

... That's it ! You can now test your installation


Wordpress
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. Log into your Wordpress account
  5. In the menu bar click on 'Presentation > Theme Editor'
  6. In the right-hand-side column click on 'Footer'
  7. insert the cursor just above the </body> tag
  8. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  9. Click on 'Update File'

... That's it ! You can now test your installation


Microsoft Office Live
  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. log into your Office Live account
  5. click on 'Web Site' in the left column
  6. Insert the cursor where you want to add 123Stat
  7. In the editor's menu bar click on Module > HTML
  8. insert the cursor anywhere in the text area
  9. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)
  10. save your changes

... That's it ! You can now test your installation


Joomla
  1. click here to open a new window containing the 123Stat code to be added to your site
  2. with your mouse, highlight the code
  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)
  4. log into your Joomla account as Admin
  5. go to the User Manager
  6. If you have more than one user with edit privileges, select the username of the person that will be adding the 123Stat script
  7. Change the User Editor parameters from the default TinyMCE WYSIWYG Editor to No WYSIWYG Editor
  8. In the editor paste the 123Stat tracking script at the bottom of each content page you'd like to track (use Ctrl + V to paste the code)
  9. save your changes

... That's it ! You can now test your installation



Default install with a web site editor or HTML editor
  1. click here to open a new window containing the 123Stat code to be added to your site

  2. with your mouse, highlight the code

  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)

  4. open your web/HTML editor

  5. most editors offer two modes of operation:

    • WYSIWYG mode (What You See Is What You Get), also named Text mode, which allows you to add elements to your web page without seeing the underlying HTML code

    • HTML mode which allows you to work directly on the HTML (this gives you greater control but is more initimidating for beginners)

  6. open your site's main page using your web editor in HTML mode (if your editor does not have an HTML mode - which is rare - please see the instructions for limited web site editors below)

  7. put the cursor just above the </body> tag at the end of the file (for instance, or anywhere else between the <body> and </body> tags if you know what you are doing - see here for more info on positionning the counter)

  8. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)

  9. save your modified web page

  10. upload the modified web page to your server (also called 'publishing')

  11. go to your site : if you have setup your counter to be visible you'll see it appear on your web page (if not you can make the counter visible just for testing purposes in the 123Stat Control Panel)

... That's it ! You can now test your installation


Default install with a limited web site editor

If your editor has limited capabilities you probably can not edit your site's HTML or add JavaScript code to your web page (the default 123Stat code contains JavaScript). The solution is to use a simplified version of the 123Stat code which is much shorter, easier to install and contains no JavaScript.

The simplified version of the code will work fine on any site. Its only drawback is that it is not capable of recording screen size, screen color, referrer and keyword information, so these reports will remain empty in your stats. Everything else will work normally.

  1. click here to open a new window containing the simplified version of the 123Stat code to be added to your site

  2. with your mouse, highlight the code

  3. press the Ctrl key and at the same time the C key (this will copy the highlighted text in memory)

  4. open your web page in your web site editor

  5. edit a paragraph of text

  6. put the cursor at the end of the text

  7. press the Ctrl key and at the same time the V key (this will paste the code at the cursor location)

  8. save your changes

  9. publish your changes

  10. go to your site : if you have setup your counter to be visible you'll see it appear on your web page (if not you can make the counter visible just for testing purposes in the 123Stat Control Panel)

... That's it ! You can now test your installation




Not working ? Need additional assistance ? Read below for additional help, or to let us do the installation for you !

If you are still having difficulties, try installing the simplified version of the code available here. The simplified code does not contain any JavaScript and as such it is shorter and easier to install. It will work just like the full code except that it will not record any referrer or keywords information.

... or contact us with your user name, the URL of the page where you have attempted to paste your counter and a description of the problems you are encoutering. If you have FTP - File Transfer Protocol(*) - access, also send your FTP details (see next paragraph).

If necessary we can install the counter on your page for you. In order to do that we'll need FTP - File Transfer Protocol(*) - access to your site, which means your FTP address, your FTP user name and your FTP password (if you don't have them, ask your host). If you are interested, contact us with these three items (along with your 123Stat user name) and we'll take care of everything for you.

(*) FTP means 'File Transfer Protocol'. It is a simple way to access your server to download and upload documents (typically to install the code we would FTP to your server, download your web page, open it with a text editor, add the 123Stat code, save it and upload it back onto your server). FTP should be made available to you by the people hosting your site. If you don't have FTP access, please contact them and ask them for your FTP address, user name and password. Most hosts provide that service as part of their hosting package.


Done installing ? Test your account


© 1998-2008 123Stat Web Counter - last update 4/17/2008 - [ support ] [ site map ]
[ currently visitors connected to www.123stat.com → get this for your site... ]